SatPro Scatter-Free
Sterile C-Arm Cover
One sterile, single-use cover that drapes the C-arm and attenuates scatter at the same time. Lead-free shielding, fluid-resistant material and a fit that takes seconds, so your team spends less time setting up and receives less dose.
(phantom testing)
Dose, hygiene and turnover, handled by one product
Under IRR17, every employer must keep staff exposure as low as reasonably practicable. SatPro adds a layer of protection right at the source of scatter, without adding steps to your set-up.
Less scatter for the team
Phantom testing shows an average 29% reduction in scattered dose, adding protection for operators, nurses and radiographers in the room.
Faster room turnover
Draping and shielding go on in one step and come off in one step. Nothing to wipe down, store or inspect between cases.
Lead-free and single-use
No reusable shields to decontaminate and no lead waste at disposal. Used covers go straight into the standard clinical waste stream.
Built for busy theatres and labs
SatPro is designed to go on quickly, stay put during movement and keep fluids off expensive equipment, without getting in the way of imaging.
Lead-free composite shielding. Protective performance without the handling, storage or disposal issues of lead.
- 1
Effective scatter reduction
Proven attenuation of scattered X-rays, with multiple shielding options available.
- 2
Sterile and single-use
Supplied EO-sterilised, removing the cross-infection risk associated with reusable shields.
- 3
Fluid-resistant and tear-resistant
Keeps blood, saline and contrast off the detector, and holds its integrity as the C-arm moves.
- 4
Quick, secure fit
Lightweight, flexible construction with elasticated edges for a snug fit and fast set-up.
- 5
Fits major C-arm brands
Designed for Siemens, GE, Philips, Canon and others, with no interference with image quality or controls.
Scatter reduction across the kVp range
Scattered radiation reduction efficiency measured at 30 cm, for one and one-and-a-half layers of SatPro shielding.
| Configuration | 60 kVp | 80 kVp | 100 kVp | 120 kVp |
|---|---|---|---|---|
| 1 layer (30 cm) | 57.9% | 49.7% | 44.4% | 40.4% |
| 1.5 layers (30 cm) | 79.0% | 72.9% | 68.5% | 65.1% |
Manufacturer test data. In clinical phantom testing, SatPro gave an average dose reduction of 29% across typical procedure conditions.
Estimate your department's saving
Based on the 29% average dose reduction.
Indicative only. Actual reduction depends on geometry, technique factors and staff position. Your RPA can help interpret results for your department.
Five steps, no extra kit
Open the sterile pack in the procedure room.
Drape the cover over the C-arm detector or image intensifier.
Secure with the elasticated edges or fixation points.
Carry out the fluoroscopic procedure as normal.
Dispose of the cover in line with local clinical waste policy.
Wherever a C-arm is in use
Operating theatres
Orthopaedic, vascular and general surgery
IR & cardiac labs
Interventional radiology and cardiology
Emergency departments
Rapid-access fluoroscopy
Pain clinics
Image-guided injections
Veterinary
Veterinary fluoroscopy, custom sizes available
Common questions
Can't see your question here? Our team has clinical and radiation protection experience and is happy to help.
Ask RothbandHow much does SatPro reduce radiation dose?
Clinical phantom testing shows an average dose reduction of 29%. Scatter reduction efficiency ranges from 40% to 79% depending on kVp and the number of shielding layers.
Does the cover affect image quality?
No. The lead-free composite has no significant impact on diagnostic image quality.
Is it difficult to set up?
No. The all-in-one, lightweight design goes on in a single step and is secured with elasticated edges.
Which C-arms does it fit?
SatPro is designed for major brands including Siemens, GE, Philips and Canon. Tailored options are available for specific models. Tell us your equipment and we'll confirm fit.
Is the material lead-free?
Yes. There are no lead handling or hazardous waste concerns at disposal.
How does it save staff time?
By combining the sterile drape and the scatter shield, SatPro removes the separate step of positioning and cleaning secondary shielding.
Is it sterile?
Yes. Each cover is supplied EO-sterilised and ready for immediate use.
Can we trial it?
Yes. Contact Rothband to arrange a trial in your theatre, lab or practice.
Protect staff. Protect patients. Protect equipment.
Arrange a trial or request a quote for your trust, hospital or practice. Rothband has supplied radiation protection from Lancashire since 1911.
Request a quote or trialSatPro Scatter-Free
Sterile C-Arm Cover
One sterile, single-use cover that drapes the C-arm and attenuates scatter at the same time. Lead-free shielding, fluid-resistant material and a fit that takes seconds, so your team spends less time setting up and receives less dose.
(phantom testing)
Dose, hygiene and turnover, handled by one product
Under IRR17, every employer must keep staff exposure as low as reasonably practicable. SatPro adds a layer of protection right at the source of scatter, without adding steps to your set-up.
Less scatter for the team
Phantom testing shows an average 29% reduction in scattered dose, adding protection for operators, nurses and radiographers in the room.
Faster room turnover
Draping and shielding go on in one step and come off in one step. Nothing to wipe down, store or inspect between cases.
Lead-free and single-use
No reusable shields to decontaminate and no lead waste at disposal. Used covers go straight into the standard clinical waste stream.
Built for busy theatres and labs
SatPro is designed to go on quickly, stay put during movement and keep fluids off expensive equipment, without getting in the way of imaging.
Lead-free composite shielding. Protective performance without the handling, storage or disposal issues of lead.
- 1
Effective scatter reduction
Proven attenuation of scattered X-rays, with multiple shielding options available.
- 2
Sterile and single-use
Supplied EO-sterilised, removing the cross-infection risk associated with reusable shields.
- 3
Fluid-resistant and tear-resistant
Keeps blood, saline and contrast off the detector, and holds its integrity as the C-arm moves.
- 4
Quick, secure fit
Lightweight, flexible construction with elasticated edges for a snug fit and fast set-up.
- 5
Fits major C-arm brands
Designed for Siemens, GE, Philips, Canon and others, with no interference with image quality or controls.
Scatter reduction across the kVp range
Scattered radiation reduction efficiency measured at 30 cm, for one and one-and-a-half layers of SatPro shielding.
| Configuration | 60 kVp | 80 kVp | 100 kVp | 120 kVp |
|---|---|---|---|---|
| 1 layer (30 cm) | 57.9% | 49.7% | 44.4% | 40.4% |
| 1.5 layers (30 cm) | 79.0% | 72.9% | 68.5% | 65.1% |
Manufacturer test data. In clinical phantom testing, SatPro gave an average dose reduction of 29% across typical procedure conditions.
Estimate your department's saving
Based on the 29% average dose reduction.
Indicative only. Actual reduction depends on geometry, technique factors and staff position. Your RPA can help interpret results for your department.
Five steps, no extra kit
Open the sterile pack in the procedure room.
Drape the cover over the C-arm detector or image intensifier.
Secure with the elasticated edges or fixation points.
Carry out the fluoroscopic procedure as normal.
Dispose of the cover in line with local clinical waste policy.
Wherever a C-arm is in use
Operating theatres
Orthopaedic, vascular and general surgery
IR & cardiac labs
Interventional radiology and cardiology
Emergency departments
Rapid-access fluoroscopy
Pain clinics
Image-guided injections
Veterinary
Veterinary fluoroscopy, custom sizes available
Common questions
Can't see your question here? Our team has clinical and radiation protection experience and is happy to help.
Ask RothbandHow much does SatPro reduce radiation dose?
Clinical phantom testing shows an average dose reduction of 29%. Scatter reduction efficiency ranges from 40% to 79% depending on kVp and the number of shielding layers.
Does the cover affect image quality?
No. The lead-free composite has no significant impact on diagnostic image quality.
Is it difficult to set up?
No. The all-in-one, lightweight design goes on in a single step and is secured with elasticated edges.
Which C-arms does it fit?
SatPro is designed for major brands including Siemens, GE, Philips and Canon. Tailored options are available for specific models. Tell us your equipment and we'll confirm fit.
Is the material lead-free?
Yes. There are no lead handling or hazardous waste concerns at disposal.
How does it save staff time?
By combining the sterile drape and the scatter shield, SatPro removes the separate step of positioning and cleaning secondary shielding.
Is it sterile?
Yes. Each cover is supplied EO-sterilised and ready for immediate use.
Can we trial it?
Yes. Contact Rothband to arrange a trial in your theatre, lab or practice.
Protect staff. Protect patients. Protect equipment.
Arrange a trial or request a quote for your trust, hospital or practice. Rothband has supplied radiation protection from Lancashire since 1911.
Request a quote or trial